I wanted to get familiar with the big data world, and decided to test Hadoop. Initially I used Cloudera’s pre-built virtual machine with their full Hadoop suite pre-configured (called Cloudera QuickStart VM), and gave it a try. It was a really interesting and informative experience. The QuickStart VM is fully functional and you can test many Hadoop services, even though it is running as a single-node cluster.
I wondered what it would take to install a small 4-nodes cluster…
I did some research and I found this excellent video on YouTube presenting a step by step explanation on how to setup a cluster with VMWare and Cloudera. I adapted this tutorial to use VirtualBox instead, and this article describes the steps used.
The overall approach is simple. We create a virtual machine, we configure it with the required parameters and settings to act as a cluster node (specially the network settings). This referenced virtual machine is then cloned as many times as there will be nodes in the Hadoop cluster. Only a limited set of changes are then needed to finalize the node to be operational (only the hostname and IP address need to be defined).
In this article, I created a 4 nodes cluster. The first node, which will run most of the cluster services, requires more memory (8Gb) than the other 3 nodes (2Gb). Overall we will allocate 14Gb of memory, so ensure that the host machine has sufficient memory, otherwise this will impact your experience negatively.
The prerequisites for this tutorial is that you should have the latest VirtualBox installed (you can download it for free); We will be using the CentOS 6.5 Linux distribution (you can download the CentOS x86_64bit DVD iso image).
Base VM Image creation
Create the reference virtual machine, with the following parameters:
- Bridge network
- Enough disk space (more than 40Gb)
- 2 GB of RAM
- Setup the DVD to point to the CentOS iso image
when you install CentOS, you can specify the option ‘expert text’, for a faster OS installation with minimum set of packages.
Perform changes in the following files. These will allow all cluster nodes to interact.
search example.com nameserver 10.0.1.1
NETWORKING=yes HOSTNAME=base.example.com GATEWAY=10.0.1.1
DEVICE=eth0 ONBOOT=yes PROTO=static IPADDR=10.0.1.200 NETMASK=255.255.255.0
Initialize the network by restarting the network services:
$> chkconfig iptables off $> /etc/init.d/network restart
Installation of VM Additions
You should now update all the packages and reboot the virtual machine:
$> yum update $> reboot
In the VirtualBox menu, select Devices, and then Insert Guest…. A DVD iso image with the guest additions is now available in the DVD Player of the VM. Mount the DVD with the following commands to access this DVD:
$> mkdir /media/VBGuest $> mount -r /dev/cdrom /media/VBGuest
Follow instructions from this web page to install the additions.
Setup Cluster Hosts
Define all the hosts that will be part of the cluster in the /etc/hosts file. This will simplify the access between nodes, specially if you do not have a DNS setup. Add as many hosts as you have nodes in your cluster.
10.0.1.201 hadoop1.example.com hadoop1 10.0.1.202 hadoop2.example.com hadoop2 10.0.1.203 hadoop3.example.com hadoop3 10.0.1.204 hadoop4.example.com hadoop4
To further simplify the access between hosts, install and setup SSH to accept automatically foreign hosts keys.
$> yum -y install perl openssh-clients $> ssh-keygen (type enter, enter, enter) $> cd ~/.ssh $> cp id_rsa.pub authorized_keys
Modify the ssh configuration file. Uncomment the following line and change the value to no; this will prevent the question when connecting with SSH to the host.
Shutdown & Clone
The reference virtual machine is now ready, and is ready to be cloned into new virtual machines that will be cluster nodes.
Shutdown the system with the following command:
$> init 0
in VirtualBox, clone the referenced virtual machine, using the ‘Linked Clone’ option and name the nodes hadoop1, hadoop2, hadoop3 and hadoop4.
For the first node (hadoop1), change the memory settings to 8Gb of memory. Most of the roles will be installed on this node, and therefore it is important that it have sufficient memory available.
For every node, proceed with the following operations
Modify the hostname of the server, change the following line in the file
Where [n] = 1..4 (up to the number of nodes)
Modify the fixed IP address of the server, change the following line in the file:
Where [n] = 1..4 (up to the number of nodes)
Let’s restart the networking services and reboot the server, so that the above changes takes effect:
$> /etc/init.d/network restart $> init 6
We have 4 running virtual machines with CentOS correctly configured.
Install Cloudera Manager on hadoop1
Download and run the Cloudera Manager Installer, which will simplify greatly the rest of the installation and setup process.
$> curl -O http://archive.cloudera.com/cm4/installer/latest/cloudera-manager-installer.bin $> chmod +x cloudera-manager-installer.bin $> ./cloudera-manager-installer.bin
To continue the installation, you will have to select the Cloudera free license version. You will then have to define which nodes will be used in the cluster. Just enter all the nodes you have defined in the previous steps(e.g. hadoop1.example.com) separated by a space. Click on the “Search” button. You can then used the root password (or the SSH keys you have generated) to automate the connectivty to the different nodes. Install all packages and services onto the 1st node.
Once this is done, you will select additional service components; just select everything by default. The installation will continue and will complete.
Using the Hadoop Cluster
Now that we have an operational Hadoop cluster, there are two main interfaces that you will use to operate the cluster: Cloudera Manager and HUE.
You can access the Cloudera Manager by connecting to the first node web site: http://hadoop1.example.com:7180, the default user to login is ‘admin’ with the password ‘admin’.
Similarly to Cloud Manager, you can access the HUE administration site by accessing: http://hadoop1.example.com:8888, where you will be able to access the different services that you have installed on the cluster.
I have been able to create a small Hadoop cluster in probably less than a hour, largely thanks to the Cloudera Manager Installer, which simplifies the installation to the simplest of operation. It is now possible to execute and use the various examples installed on the cluster, as well as understand the interactions between the nodes.
I have written an article (Experimenting Hadoop with Real Datasets) that explains how I have used this cluster to process and visualize temperatures over a long period of time in the USA.
Comments and remarks are welcome!
Incoming search terms:
- https://yandex ru/clck/jsredir?from=yandex ru;search;web;;&text=&etext=1834 _2UIfIvMQtMulxSefu9GH489_DQikK18zhUFLlcK03I 42fdf5b7ed5045e913242ce7a5d080166c0a6431&uuid=&state=_BLhILn4SxNIvvL0W45KSic66uCIg23qh8iRG98qeIXmeppkgUc0YLeQVNu7TCjFWh